Wood Floor Polish

Posts Tagged ‘refinishing’

For a Free Estimate, contact Amherst Finishing at (716) 907-2746 Today! In this video Tim is using a Lagler Hummel to drum sand the floor, equipped with an Oneida Vac cyclone dust pre separator with HEPA filter. The sander and separator are connected to a Blastrac 1219 HEPA vac placed outside the home by a main 2″ and 1.5″ vacuum hose. The combination of this hardware creates an extremely high quality sanding job with hardly any dust whatsoever. After the 8″ hummel belt sander has been used to sand the bulk of the floor, Tim will either use our Clarke Super 7R or Lagler Unico Edger to sand the edges starting with 36 grit up to 120 grit sandpaper. To feather out the edger cut marks into the belt sander area, Tim will use a 6″ Rigid Random Orbit Sander with 80 and 100 grit sandpaper, which also is attached to this same vacuum system. The corners will then be sanded by hand, and then the whole floor sanded again with a Cherry Hill Upright 4-pad random orbit sander with 120 grit sandpaper to eliminate any possible chatter marks left by the hummel. Depending on the degree to which the customer wants the stain to soak in to the wood, Tim may sand the floor a final time with a Clarke square floor buffer with either 120 or 150 grit sandpaper to close the grain of the floor up a little more. The finishing process will be shown under another one of our videos!

Additional Information

This overview of hardwood floor refinishing shows all the steps taken by Dale of Swirsding’s Floor Service. For more details on each step, look for the three part video series: Sanding, Staining and Final Finish. Call Dale at 510-853-1414 for a free estimate.

Additional Information

Application of Bona Mega waterbased finish on white oak hardwood floors using a T-bar with a foam applicator. Hardwood floor refinishing project by MS Construction – Atlanta Project location : Cumming, GA Project scope: refinish existing 1953 hardwood floors / install new hardwood floors to match existing Project size: 960 sqft Project completed: 4 days. www.getyourfloors.com

Additional Information

Hardwood Floors Minneapolis, St.Paul, MN and surrounding areas. Specializing in installation, dustless sanding and refinishing, repairs, and flooring sales. Call for a free estimate: (612)839-6514 Visit us @ www.rhodeshardwoodflooring.com http

Additional Information

New York Wood Flooring is a family owned and operated firm, able to handle projects from complete buildings to small repairs. Unlike many of the wood flooring company’s operating in the city today, we have a convenient Manhattan location where you will be able to visit our home before inviting us into yours. Visit us at www.nywflooring.com.

Additional Information

Denver hardwood flooring installation 303-255-5554 Get Hardwood here bit.ly Please visit our website www.patioandhomeimprovementdesign.com We’re on day 4 of this hardwood floor install. We have finished most of the flooring and will be working on installing the new base boards next. We will also be remodeling the bathroom in this home next. Thanks for tuning in.

Additional Information

Denver Hardwood Flooring Installation 303-255-5554 Get hardwood flooring here bit.ly www.patioandhomeimprovementdesign.com We are in Centennial Colorado installing new oak hardwood floors. We’ve taken all of the old carpet out & prepped the floors for the new install. We will also be replacing all of the base boards as well.

Additional Information

Welcome to www.TheMostThorough.com 714-730-0148 toll free 866-641-MOST Serving Orange, LA and Riverside Counties since 1989 Natural Stone, Granite, Marble, Travertine, Sandstone, Flagstone, Limestone, Slate, Onyx, Saltillo, Terra Cotta, Terrazzo, Brick, Concrete, Ceramic & Porcelain Tile…

Additional Information

Refinish Hardwood floor refinishing “Without” all the dust. When refinishing hardwood floors, most contractors will use a canvas bag on their sanding machine, we don’t. A Canvas bag has to breath in order to work and when it does, it releases fine dust particulates into your home. With a DCS (Dust Control System), National floors will be using a vacuum that attaches to “ALL” of our machines during the complete process. This DCS system removes over 99% of the dust. It’s good for you, it’s good for us and it’s good for the final results in your floors. Because of this, you are left with superior results! National-floors.com refinishes hardwood floors in Fremont ca, Pleasanton ca, Livermore ca, Dublin CA, Palo Alto ca, Los Altos ca, Atherton CA, Santa clara ca, Sunnyvale ca, San Jose ca, Milpitas ca, Castro Valley, Hayward ca, San Leandro Ca, Oakland Ca, Newark CA, Redwood city ca, San Carlos Ca, San Mateo ca, for a free estimate contact us at 866-783-2674 or visit us at www.national-floors.com

Additional Information

www.AFWoodFloors.ca Installation of unfinished 3/4″ x 3 1/4″ red oak hardwood. Floors are then rough sanded, filled, smooth sanded, polished and stained.

Additional Information

Hardwood floors are easy to keep clean and collect less dust, allergens and bacteria. Removing old carpets & refinishing the underlying wood adds more value to your home. Call 781-325-8070 ‎ or visit MarksMasterService.com. Avoid getting wall-to-wall carpeting. Regrettably, cleaning isn’t enough to get rid of dust mites and mite waste. As much as ninety five percent of dust mites may remain after cleaning, simply because they live inside within all the stuffing of sofas, chairs, beds, pillows and carpeting. These small bugs are among the worst opponents of individuals with allergic reactions. They cannot be viewed using the human eye alone, they live inside carpeting, cushions and bedding. There they excrete waste material that create allergic signs and symptoms. Hardwood flooring are a perfect kind of floor for persons with allergic reactions and bronchial asthma. Consider getting rid of the old wall-to-wall carpeting and refinish your underlying hardwood flooring. Washable throw area rugs over smooth hardwood flooring is a lot more sanitary then wall-to-wall carpeting. Still, finishing items may cause a brief a reaction to the harmful chemicals used along the way. Speak with Mark Changelian, who owns Mark’s Master Service, about the kind of finish that are offered. Mark’s Master Service provides an eco-friendly water based discoloration, that’s without toxic fumes and it is quick drying out. Now providing hardwood floor refinishing, installation & dustless sanding to …

Additional Information

Applying Bona Naturale Matte wood floor finish.

Additional Information

Sanding existing wood floors using a clark edger and dustless equipment.

Additional Information

A before look at my old dingy oak floor and some prep work removing moulding. DIY 108 and 109 show the sanding and finishing phases of this project.

Additional Information

The first major task in our new home is taking up all the carpet and refinishing the 100-year-old hardwood floors beneath. Project time = about 9 days.

Additional Information